Norris design comfortable cruising cutter
(REF# 37135)
£29,950.00
Reduced
10.4m (34'0"), 1987, 1 x diesel 50hp
Ferro Cement Construction, Long Keel underwater profile, 4 berths
|
| Extra Details
| Designer: | Norris |
| Builder: | Miller of Australia |
| Fuel capacity: | 2 x 341 ltr (75.0 G) |
| Water capacity: | 1 x 182 ltr (40.0 G) |
| Holding tank capacity: | 1 x 182 ltr (40.0 G) |
| Last survey: | 01/01/2005 |
|
|
Mechanical
1 x diesel 50hp, Perkins 4108 (1987)
fresh-water cooled,
tiller steering,
shaft drive, Three blade prop(s).
Fuel consumption (approx) 5ltrs/hour,
Cruising speed 6 knots,
Max speed 8 knots.
|
|
Electrical Systems
12 volt, 3 batteries charged by: engine, wind generator, shore power
|
|
| Dimensions
| LOA: | 10.4m (34'0") |
| LWL: | 9.4m (31'0") |
| Beam: | 3.5m (11'5") |
| Draft Min: | 1.2m (4'0") |
| Draft Max: | 2.1m (7'0") |
| Displacement: | 12,192kg (26,883.4lbs) |
| Headroom: | 1.8m (6'0") |
| Storage: | On marina |
|
| Construction
Ferro Cement Construction with Long Keel underwater profile, paint finish.
Please note that the Keel is long with an additional drop keel. So the following benefits can be gained:-The 7ft draft facilitates passage through heavy ocean waves and a Shoal draft for coastal waters. This makes for an extremely versatile and ocean going yacht. Also, overall length is 34ft with an additional 4ft bow sprit.
She had a favourable survey 3 years ago and is at present insured by Yachtmaster Insurance. |
| Rig
Cutter rigged Not known Aluminium spars (1987), with Stainless Steel standing rigging (1987) |
| Sails
Slab reefing mainsail Not known (1987)
Furling headsail (1987)
Other sails:
Foresail (1987)
Spinnaker gear,
2 halyard winches,
2 sheet winches
|
| Accommodation
4 berths with 2 doubles and 0 singles in 2 cabin(s).
2 burner gas cooker, with Grill and Oven. Sink, Cabin heating
1 heads (Sea Toilet), 1 handbasin.
Pressurised water system
Fresh water wash
There is an additional pilot berth.
Space to add shower.
Cooker is a 'Force 10'.
Double sink to galley. There is fresh water and sea water to the galley sink.
Australian hardwood timber flooring. |
|
| Nav Equipment
Compass, Speed, Wind, Log, Echo sounder, VHF, Chart plotter, Autopilot, Stereo, Clock, Barometer, Navigation lights
Autohelm works off the Aries.
|
| Deck Gear
1 anchors (plough),
50 metres of chain,
Sail cover, Sprayhood, Warps, Fenders, Boathook, electric Not known windlass,
Aries windvane self-steering system.
Wind vane charging system.
Windlass can be controlled from cockpit and deck.
|
| Fishing
|
|
| Toys
|
| Safety Equipment
Gas detector, Liferaft, Emergency steering, Boarding ladder, 1 bilge pumps (0 manual / 1 electric) |
| Lying
MEDWAY |
| Broker's Comments
Register with Boatshed to see 53 extra photos of this Norris design comfortable cruising cutter.
These boat details are subject to contract. Preliminary details awaiting owners consent.
Just look at the photographs. Look at this great ocean going yacht. Tried and tested She has voyaged across the Atlantic from Australia where she was crafted and over to the Mediterranean. She is powerful, with heavy displacement making her incredibly seaworthy. She comes from a reknown stable being a professionaly built ferro ocean going lady like the Allied Seawind. Any true seadog will appreciate this yacht.
She benefits from a cavenous interior with much storage space for those up for the big horizons.
You can see from the inventory that she is geared up for more voyages. She has a lovely personality and soul.
If you would like to be her new owner then contact me for a viewing.
Note: Offers on the asking price may be considered.
This Norris design comfortable cruising cutter has been personally photographed and viewed by Suzzanne McDonald of Boatshed Medway. Click here for contact details. |
|
